-
MVC Plus Series
AC Supply Voltage
2300, 3300, 4160, 6000/7200V, 11-15kV
VAC +10% to -15%, 50/60 Hz line voltagesHP Ratings
Up to 7500HP @ 7.2kV (600 Amps max)
Up to 15000HP @ 15kV (600 Amps max)Overload Ratings
500% - 60 seconds, 600% - 30 secondsContact factory for higher rating requirements
-
XLD Soft Starter (Legacy Product)
AC Supply Voltage
200 - 600 VacHP Ratings
10 to 1125 HP
(39 to 1250 Amps)
-
DXT Advanced Digital Soft Starter
AC Supply Voltage
200 to 600 VacHP Ratings
10 to 1125 HP
(39 to 1250 Amps)
-
Heavy Duty Configured Soft Starter
AC Supply Voltage
200 to 600 VacHP Ratings
5 to 1000 HP(21 to 1080 Amps)
Heavy Duty Rated
500% for 30 sec. -
Configured Soft Starter
AC Supply Voltage
200 to 600 VacHP Ratings
5 to 1200 HP(18 to 1250 Amps)
-
Compact Soft Starter
AC Supply Voltage
200 - 600 VacHP Ratings
3 to 1200 HP(18 to 1250 Amps)
-
MT Series: High Performance AC Drive
AC Supply Voltage
230 / 460 VacHP Ratings
0.5 to 400 HP -
ME2 Series: Micro AC Drive
AC Supply Voltage
230 / 460 VacHP Ratings
0.25 to 3 HP -
Electronic Motor Brakes
AC Supply Voltage
200 to 600 VacHP Ratings
3 to 1000 HP
DANH MỤC SẢN PHẨM
THỐNG KÊ TRUY CẬP
- Số người truy cập : 1.305.250
- Số người online : 1
-
VirtualSCADA VS1-MT for Motortronics Soft Starters, AC Drives and Motor Protection Releays gives users web-based access to their system using a standard internet web-browser. Standard built-in features include data-logging, alarm handling, monitoring and control. VirtualSCADA VS1-MT can be configured in just a matter of minutes and is compatible with any 3rd party device that supports MODBUS RTU over RS232/RS485 or MODBUS/TCP over Ethernet.
-
The MVC Plus Medium Voltage Series Soft Starter is designed to start AC motors in any fixed speed application. It provides maximum protection with "True Thermal Modeling," while allowing smooth, stepless control of acceleration and deceleration. The MVC Plus Series guarantees power control and protection for your most important assets.
-
New VCM User Manual Now Available VCM Series is a compact, cost-effective drive with features typically found only in more complex and expensive AC drives. This full featured sensorless vector drive is recognized for being simple to set up, program and operate. Available in ratings from 0.5 to 75HP, the VCM Series is ideally for nearly any application. The convenient operator panel provides simple, yet informative interface during setup and operation.
-
Updated VMX User Manual Now Available Flexibility of Control Multiple ramp profiles, Pump-FlexTM Decel, process control timers and advanced motor protection make the VMX Series soft starter adaptable to a wide variety of AC motor applications... no need for add-on modules or costly auxiliary devices.
-
Updated Rx User Manual and ZCT Option Info Sheet Now Available Take your motor protection to a new level. The RX Series provides more than just solid state overload or power protection relays. By using features previously found only in large expensive Motor Protection Relays, the RX Series allows even small to medium sized motor applications to be protected by the best technology available, yet at a price affordable to all.
-
A MLink software update is now available for the Rx Motor Protection Relay, V1.03.10. Take your motor protection to a new level. The RX Series provides more than just solid state overload or power protection relays. By using features previously found only in large expensive Motor Protection Relays, the RX Series allows even small to medium sized motor applications to be protected by the best technology available, yet at a price affordable to all.
-
May 27th 2010: What's new in Version 1.1.1.0: - Serial Parameters Page 11 now independent from project - Highlighted report setpoint page titles - Temperature engineering units now show °C instead of C for parameters and status - Improved graphics menu bar - Updated help file - Various small improvements & fixes
-
VirtualSCADA VS1-MT for Motortronics Soft Starters, AC Drives and Motor Protection Releays gives users web-based access to their system using a standard internet web-browser. Standard built-in features include data-logging, alarm handling, monitoring and control. VirtualSCADA VS1-MT can be configured in just a matter of minutes and is compatible with any 3rd party device that supports MODBUS RTU over RS232/RS485 or MODBUS/TCP over Ethernet.
-
Take your motor protection to a new level. The RX Series provides more than just solid state overload or power protection relays. By using features previously found only in large expensive Motor Protection Relays, the RX Series allows even small to medium sized motor applications to be protected by the best technology available, yet at a price affordable to all.
-
VCM Sensorless Vector AC Drive MLink Software Update Now Available: V1.5.0.0 This software offers users ease of programming, startup and trouble-shooting for the VCM Sensorless Vector Drive What's new in this update: - New Ethernet communication, VCM MLink can now be used over a Modbus/TCP network. - New Communication layer for faster parameter read/write - Updated parameter reports - Updated parameter overview - Updated parameter management - Updated help file
-
Take your motor protection to a new level. The RX Series provides more than just solid state overload or power protection relays. By using features previously found only in large expensive Motor Protection Relays, the RX Series allows even small to medium sized motor applications to be protected by the best technology available, yet at a price affordable to all.
-
The TE-RTD12 Relay device adds advanced RTD (Resistor Temperature Detector) and differential current monitoring capability to your new or existing motor system. The TE-RTD12 Relay device offers 12 built-in RTD inputs, 3 programmable output relays (5A), 2 isolated analog inputs (4-20mA), 1 isolated analog output (4-20mA), 3 isolated digital inputs, and differential current feedback monitoring.
- Sản phẩm Tiêu biểu
- Sản phẩm xem nhiều nhất
LIÊN KẾT WEBSITE
